MERCEDES-BENZ B-KLASSE, MERCEDES-BENZ CLA
Diverse bouten, waaronder de gordelbevestigingsbouten, zijn niet goed gemonteerd.
Most recent published dates first. Updated automatically from bounded verified sources. These listings are supplementary research, not individual VIN clearance.
Notice data may be incomplete or delayed by the original source. For individual applicability or repair status, contact the manufacturer or authority. Original reviewed guides are available in the journal.
Diverse bouten, waaronder de gordelbevestigingsbouten, zijn niet goed gemonteerd.
On affected vehicles there may be insufficient clearance between a bulkhead bolt and the fuel tank which could cause damage over time and lead to a fuel leak. Remedy: Replace the bulkhead bolt.
For affected vehicles the interior mirror mounting plate may not have been bonded to the windscreen sufficiently. The rear view mirror could become partially or even completely detached from the windshield. Remedy: The windscreen (including interior mirror mounting) will be replaced.
The front axle control arm may not be properly secured. This could lead to a loss of steering control, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A seatbelt anchor in the second row of seats may not have been properly attached during assembly. This may impair the protective effect of the seatbelt in the event of an accident, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The fuel tank wall near the inlet check valve is thinner than specified. In the event of a crash, the tank may not withstand the impact adequately, which could lead to fuel leakage and potentially cause a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The screw connection of the upper joint bearing on the rear shock absorber’s piston rod may become detached. This could cause the spring strut to lose its upper support, resulting in failure of the suspension and damping on the affected rear wheel. The wheel may then strike the bodywork and vehicle handling may deteriorate significantly, increasing the risk of an accident and injury. The product does not comply with the Regula
The side panels of the panoramic roof may become detached from the vehicle and fall onto the road, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A fault in the hydraulic control unit of the ABS system may cause an incorrect pressure reading. This could inadvertently activate the brake light, deactivate the ABS and ESP, and allow the vehicle to start and shift out of Park without the brake pedal being depressed, increasing the risk of unintended vehicle movement, accidents and injury. The product does not comply with the Regulation on the approval and market surveillanc
A fault in the hydraulic control unit of the ABS system may cause an incorrect pressure reading. This could inadvertently activate the brake warning light, deactivate the ABS and ESP, and allow the vehicle to start and shift out of Park without the brake pedal being depressed, increasing the risk of unintended vehicle movement, accidents and injury. The product does not comply with the Regulation on the approval and market sur
The seats may not have been correctly bolted to the seat frame. In the event of a collision, this could impair the restraint and protection of passengers, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The battery management system in the lithium-ion batteries in the toilet and adapter kit does not prevent charging when the temperature is at or below 0°C. The battery can be damaged if charged at temperatures below 0°C. Damaged batteries can overheat, release smoke and toxic gas or catch fire in any weather, even if not being used.