Polestar 2
One of the bolts holding the front left seat can be improperly fitted. This can increase the risk of injuries, in the event of a crash.
Latest vehicle recall notices
Most recent published dates first. Updated automatically from bounded verified sources. These listings are supplementary research, not individual VIN clearance.
Notice data may be incomplete or delayed by the original source. For individual applicability or repair status, contact the manufacturer or authority. Original reviewed guides are available in the journal.
Bz4X, Corolla Cross and NX
The programming of the forward recognition camera software can lead to memory failure when the ignition is turned OFF. This can prevent the pre-collision system from activating upon the next ignition start, triggering warning lights, sounding chimes, and displaying alerts on the dashboard. Ignoring these warning can increase the risk of accidents and injuries.
CRV, CRV Hybrid, Civic, HRV, Jazz, NSX.
The fuel pump impeller's defective molding can cause the impeller to have low density, which can lead to cracking. This can result in the impeller absorbing too much fuel, deforming, and potentially causing the fuel pump to fail. This failure can lead to the engine stalling while driving or failing to start, creating a risk of accidents and injuries to vehicle occupants.
Mutiple models
Camera cases on vehicles may come apart under stress due to improper welding, allowing water ingress and potential short-circuiting. This could result in the loss of front or rear camera imagery, increasing the risk of accident and injuries for users relying solely on these cameras to check their surroundings.
CFMOTO CF110AY Youth ATV (updated)
The throttle limiting adjustment screw may be improperly adjusted, which may cause the throttle to become stuck open and cause the vehicle to accelerate without throttle input.
LX600, Land Cruiser, Tundra
The vehicles can contain crankshaft main bearings that have not been properly cleared of machining debris during manufacturing. This contamination can cause the bearings to fail. This can lead to engine knocking, rough running, inability to start, or stalling. If the engine stalls while driving, the sudden loss of power increases the risk of accidents and injuries.
Proace City, Proace City Verso
In some braking situations the Controller Area Network (CAN) system might send erroneously a CAN signal “invalid value” for vacuum pressure in booster. This deactivates thee Hydraulic Brake compensation, causing a brake vacuum loss that can lead to reduced braking performance. This increases the risk of accidents and injuries.
F-Max
Steering shaft and column connection may dislocate and steering wheel will rotate without a steering effect. Steering functionality directly affected by this error state with lose of vehicle direction. This increases the risk of an accident.
i20/Bayon (BC3)
An error may occur in the Double Clutch Transmission or the Transmission Control Unit. This can lead to unintended deceleration, creating a risk of accidents and injuries.
Kauai N (OS N) & Santa Fé PE (TM PE)
Faulty error messages may occur, leading the Double Clutch Transmission (DCT) gearbox to go into safety mode, resulting in the vehicle losing drive power. This creates a risk of accidents and injuries.
IONIQ 5 (NE) & IONIQ 6 (CE)
The charger of the vehicle’s 12-volt battery may malfunction, and switch to the backup mode. Driving in this mode can cause a full loss of driving power, increasing the risk of accidents and injuries.
CRF50, CRF110, CRF125
Insufficient bonded area of left handle grip can cause the grip to loosen. This can result in the rider falling, increasing the risk of accidents and injuries.