Most recent published dates first. Updated automatically from bounded verified sources. These listings are supplementary research, not individual VIN clearance.
Notice data may be incomplete or delayed by the original source. For individual applicability or repair status, contact the manufacturer or authority. Original reviewed guides are available in the journal.
The telematics unit for e-Call may not work as required. The Public Safety Answering Points (PSAPs), the automatic callback function from the PSAP, to the vehicle does not work. The PSAP cannot automatically re-establish the connection with the vehicle if the initial connection has ended.This can hinder or delay emergency assistance, treatment of injuries.
The fastener may fracture, potentially allowing the rear shock absorber adjuster to contact the rear tyre.
The tyre beading may separate (unseat) from the rim. This will cause the tyre to immediately and completely deflate.
The bike does not meet the mandatory standard for quad bikes and general use quad bikes . The operator protection device (OPD) may not meet the requirements set out by the standard for rollover protection.
The DC-DC converter may be faulty, which can cause the current from the 12V battery to continue to flow, generating heat and increasing the risk of a vehicle fire.
A software error in the Engine Control Unit prevents the Malfunction Indicator Light (MIL) from activating if the urea injection system shuts down. This may result in higher emissions and poses a risk to the environment.
A manufacturing fault in the battery could cause a short circuit.
This accessory is non-compliant and does not meet the safety specifications of Australian Design Rule 8/01 - Safety Glazing Material, the windshield may have inadequate visibility under normal operating conditions.
These quad bikes don’t comply with the mandatory standard for quad bikes . Safety warning information is missing and the quad bikes do not have compliant operator protection devices (OPD).
The product does not comply with the mandatory safety standard for quad bikes. The product does not have: • The lateral roll stability tag proof to record the minimum angle that the quad bike tipped sideways on to two wheels during testing. • A permanent rollover warning label attached to inform consumers about product risks. • A compliant operator protection device (OPD).
The air conditioning system may be faulty, causing loss of current inside the compressor. The diagnostic software will detect this loss of power and shut down the vehicle's power-train without warning, increasing the risk of an accident.
Affected vehicles may be equipped with a B-Pillar manufacturer label with incorrect weight data which can lead to a non-conformity to regulatory requirements. Remedy: Replace the manufacturer label with one that has correct load values.