Monsterpro Z50 Replica Motorbike
A functioning, thumb operated supplemental engine stop has not been installed on the handlebar as required under Consumer Protection Notice No. 24 of 2011.
Most recent published dates first. Updated automatically from bounded verified sources. These listings are supplementary research, not individual VIN clearance.
Notice data may be incomplete or delayed by the original source. For individual applicability or repair status, contact the manufacturer or authority. Original reviewed guides are available in the journal.
A functioning, thumb operated supplemental engine stop has not been installed on the handlebar as required under Consumer Protection Notice No. 24 of 2011.
There is a risk of insufficient weld penetration and/or overgrinding of the weld on the suspension trailing arm elbow resulting in reduced material thickness.
3rd row seat retaining bolts and 2nd row seat belt shoulder anchor retaining bolts may not be tightened to the correct specification Remedy: Re-tighten the 2nd rear seat shoulder belt bolts the 3rd row seat bolts and the 3rd row seat shoulder belt buckle bolts to the correct specification .
The dust boot on the throttle cable can come loose, allowing it to get pushed into the throttle linkage.
The affected bikes have a front and rear cable operated braking system which requires manual adjustment and does not comply with Australian Standards - Competition & Consumer Act 2010 - Consumer Protection Notice No.24 of 2011.
Incorrect bolts may have been used to install the Isuzu Tow Bar Package.
It is possible that the eyelet of the secondary cable of the parking brake may break.
The rear locking hook on the product may deteriorate due to general road usage and constant bumping, which can cause the top box to become dislodged.
The affected bikes have a front and rear cable operated braking system which requires manual adjustment and does not comply with Australian Standards - Competition & Consumer Act 2010 - Consumer Protection Notice No.24 of 2011
The dust gaiter/push-rod assembly in the brake master cylinder is defective.
Moisture may enter the air bag module because of a misalignment of the air conditioning system drain tube.
In the event the heater fan resistor thermal fuse is affected by a combination of several factors there is a possible risk of fire. Remedy: Replace the resistor fuse with modified type. Fit new moulding to base of windscreen and where not already done so replace heater motor assembly.